# Since 0.8.0

# Breaking

# Unsupported platforms

  • With this release we now use an embedded envoy binary as our proxy server. Due to this change we now only build and support Linux and MacOS binaries with the AMD64 architecture. We plan on supporting more platforms and architectures in future releases.

# Observability

  • The service label on metrics and tracing no longer reflects the Services configuration option directly. pomerium will be used for all-in-one mode, and pomerium-[service] will be used for distributed services

# Tracing

  • Jaeger tracing support is no longer end-to-end in the proxy service. We recommend updating to the Zipkin provider for proper tracing support. Jaeger will continue to work but will not have coverage in the data plane.
  • Option tracing_debug is no longer supported. Use tracing_sampling_rate instead. Details.

# Metrics

With this release we now use an embedded envoy binary as our proxy server.

  • Due to this change, data plane metric names and labels have changed to adopt envoy's internal data model. Details

# Since 0.7.0

# Breaking

# Using paths in from URLs

Although it's unlikely anyone ever used it, prior to 0.8.0 the policy configuration allowed you to specify a from field with a path component:

policy:
  - from: "https://example.com/some/path"

The proxy and authorization server would simply ignore the path and route/authorize based on the host name.

With the introduction of prefix, path and regex fields to the policy route configuration, we decided not to support using a path in the from url, since the behavior was somewhat ambiguous and better handled by the explicit fields.

To avoid future confusion, the application will now declare any configuration which contains a from field with a path as invalid, with this error message:

config: policy source url (%s) contains a path, but it should be set using the path field instead

If you see this error you can fix it by simply removing the path from the from field and moving it to a prefix field.

In other words, this configuration:

policy:
  - from: "http://example.com/some/path"

Should be written like this:

policy:
  - from: "http://example.com"
    prefix: "/some/path"

# Since 0.6.0

# Breaking

# Getting user's identity

WARNING

This changed was partially reverted in v0.7.2. Session details like user, email, and groups can still be explicitly extracted by setting the jwt_claims_header configuration option.

User detail headers ( x-pomerium-authenticated-user-id / x-pomerium-authenticated-user-email / x-pomerium-authenticated-user-groups) have been removed in favor of using the more secure, more data rich attestation jwt header (x-pomerium-jwt-assertion).

If you still rely on individual claim headers, please see the jwt_claims_headers option here.

# Non-standard port users

Non-standard port users (e.g. those not using 443/80 where the port would be part of the client's request) will have to clear their user's session before upgrading. Starting with version v0.7.0, audience (aud) and issuer (iss) claims will be port specific.

# Since 0.5.0

# Breaking

# New cache service

A back-end cache service was added to support session refreshing from single-page-apps.

  • For all-in-one deployments, no changes are required. The cache will be embedded in the binary. By default, autocache an in-memory LRU cache will be used to temporarily store user session data. If you wish to persist session data, it's also possible to use bolt or redis.
  • For split-service deployments, you will need to deploy an additional service called cache. By default, pomerium will use autocache as a distributed, automatically managed cache. It is also possible to use redis as backend in this mode.

For a concrete example of the required changes, consider the following changes for those running split service mode,:

...
  pomerium-authenticate:
    environment:
      - SERVICES=authenticate
+      - CACHE_SERVICE_URL=http://pomerium-cache:443
...
+  pomerium-cache:
+    image: pomerium/pomerium
+    environment:
+      - SERVICES=cache
+    volumes:
+      - ../config/config.example.yaml:/pomerium/config.yaml:ro
+    expose:
+      - 443

Please see the updated examples, and cache service docs as a reference and for the available cache stores. For more details as to why this was necessary, please see PR438 and PR457.

# Since 0.4.0

# Breaking

# Subdomain requirement dropped

  • Pomerium services and managed routes are no longer required to be on the same domain-tree root. Access can be delegated to any route, on any domain (that you have access to, of course).

# Azure AD

  • Azure Active Directory now uses the globally unique and immutableID instead of group name to attest a user's group membership. Please update your policies to use group ID instead of group name.

# Okta

  • Okta no longer uses tokens to retrieve group membership. Group membership is now fetched using Okta's API.
  • Okta's group membership is now determined by the globally unique and immutable ID field. Please update your policies to use group ID instead of group name.
  • Okta now requires an additional set of credentials to be used to query for group membership set as a service account.

# OneLogin

  • OneLogin group membership is now determined by the globally unique and immutable ID field. Please update your policies to use group ID instead of group name.

# Force Refresh Removed

Force refresh has been removed from the dashboard. Logging out and back in again should have the equivalent desired effect.

# Programmatic Access API changed

Previous programmatic authentication endpoints (/api/v1/token) has been removed and has been replaced by a per-route, oauth2 based auth flow. Please see updated programmatic documentation how to use the new programmatic access api.

# Forward-auth route change

Previously, routes were verified by taking the downstream applications hostname in the form of a path (e.g. ${forwardauth}/.pomerium/verify/httpbin.some.example) variable. The new method for verifying a route using forward authentication is to pass the entire requested url in the form of a query string (e.g. ${forwardauth}/.pomerium/verify?url=https://httpbin.some.example) where the routed domain is the value of the uri key.

Note that the verification URL is no longer nested under the .pomerium endpoint.

For example, in nginx this would look like:

-    nginx.ingress.kubernetes.io/auth-url: https://forwardauth.corp.example.com/.pomerium/verify/httpbin.corp.example.com?no_redirect=true
-    nginx.ingress.kubernetes.io/auth-signin: https://forwardauth.corp.example.com/.pomerium/verify/httpbin.corp.example.com
+    nginx.ingress.kubernetes.io/auth-url: https://forwardauth.corp.example.com/verify?uri=$scheme://$host$request_uri
+    nginx.ingress.kubernetes.io/auth-signin: https://forwardauth.corp.example.com?uri=$scheme://$host$request_uri

# Since 0.3.0

# Breaking

# Authorize Service URL no longer used in all-in-one mode

Pomerium no longer handles both gRPC and HTTPS traffic from the same network listener (port). As a result, all-in-one mode configurations will default to serving gRPC traffic over loopback on port 5443 and will serve HTTPS traffic as before on port 443. In previous versions, it was recommended to configure authorize in this mode which will now break. The error will typically look something like:

rpc error: code = DeadlineExceeded desc = latest connection error: connection closed

To upgrade, simply remove the AUTHORIZE_SERVICE_URL setting.

# Removed Authenticate Internal URL

The authenticate service no longer uses gRPC to do back channel communication. As a result, AUTHENTICATE_INTERNAL_URL/authenticate_internal_url is no longer required.

# No default certificate location

In previous versions, if no explicit certificate pair (in base64 or file form) was set, Pomerium would make a last ditch effort to check for certificate files (cert.key/privkey.pem) in the root directory. With the introduction of insecure server configuration, we've removed that functionality. If there settings for certificates and insecure server mode are unset, pomerium will give a appropriate error instead of a failed to find/open certificate error.

# Authorize service health-check is non-http

The Authorize service will no longer respond to HTTP-based healthcheck queries when run as a distinct service (vs all-in-one). As an alternative, you can used on TCP based checks. For example, if using Kubernetes:

---
readinessProbe:
  tcpSocket:
    port: 443
  initialDelaySeconds: 5
  periodSeconds: 10
livenessProbe:
  tcpSocket:
    port: 443
  initialDelaySeconds: 15
  periodSeconds: 20

# Non-breaking changes

# All-in-one

If service mode (SERVICES/services) is set to all, gRPC communication with the authorize service will by default occur over localhost, on port :5443.

# Since 0.2.0

Pomerium v0.3.0 has no known breaking changes compared to v0.2.0.

# Since 0.1.0

Pomerium v0.2.0 has no known breaking changes compared to v0.1.0.

# Since 0.0.5

This page contains the list of deprecations and important or breaking changes for pomerium v0.1.0 compared to v0.0.5. Please read it carefully.

# Semantic versioning changes

Starting with v0.1.0 we've changed our releases are versioned (MAJOR.MINOR.PATCH+GITHASH). Planned, monthly releases will now bump MINOR and any security or stability releases required prior will bump PATCH.

Please note however that we are still pre 1.0.0 so breaking changes can and will happen at any release though we will do our best to document them.

# Breaking: Policy must be valid URLs

Previously, it was allowable to define a policy without a schema (e.g. http/https). Starting with version v0.1.0 all to and from policy URLS must contain valid schema and host-names. For example:

policy:
  - from: httpbin.corp.domain.example
    to: http://httpbin
    allowed_domains:
      - pomerium.io
  - from: external-httpbin.corp.domain.example
    to: https://httpbin.org
    allow_public_unauthenticated_access: true

Should now be:

policy:
  - from: https://httpbin.corp.domain.example
    to: http://httpbin
    allowed_domains:
      - pomerium.io
  - from: https://external-httpbin.corp.domain.example
    to: https://httpbin.org
    allow_public_unauthenticated_access: true

# Since 0.0.4

This page contains the list of deprecations and important or breaking changes for pomerium v0.0.5 compared to v0.0.4. Please read it carefully.

# Breaking: POLICY_FILE removed

Usage of the POLICY_FILE envvar is no longer supported. Support for file based policy configuration has been shifted into the new unified config file.

# Important: Configuration file support added

  • Pomerium now supports an optional -config flag. This flag specifies a file from which to read all configuration options. It supports yaml, json, toml and properties formats.

  • All options which can be specified via MY_SETTING style envvars can now be specified within your configuration file as key/value. The key is generally the same as the envvar name, but lower cased. See Reference Documentation for exact names.

  • Options precedence is environmental variables > configuration file > defaults

  • The options file supports a policy key, which contains policy in the same format as POLICY_FILE. To convert an existing policy.yaml into a config.yaml, just move your policy under a policy key.

    Old:

    - from: httpbin.corp.beyondperimeter.com
      to: http://httpbin
      allowed_domains:
        - pomerium.io
      cors_allow_preflight: true
      timeout: 30s
    

    New:

    policy:
      - from: httpbin.corp.beyondperimeter.com
        to: http://httpbin
        allowed_domains:
          - pomerium.io
        cors_allow_preflight: true
        timeout: 30s
    

# Authenticate Internal Service Address

The configuration variable Authenticate Internal Service URL must now be a valid URL type and contain both a hostname and valid https schema.